Table of Contents
Advertisement
FIELD
DHCP Setup
DHCP If set to Server, your Prestige can assign IP addresses, an IP default
Client IP Pool Starting
Address
Size of Client IP Pool This field specifies the size or count of the IP address pool.
Primary DNS Server
Secondary DNS
Server
Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
FIELD
TCP/IP Setup
IP Address Enter the (LAN) IP address of your Prestige in dotted decimal
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
RIP Direction Press [
Version Press [
Ethernet Setup
Table 11-1 DHCP Ethernet Setup Menu Fields
gateway and DNS servers to Windows 95, Windows NT and other
systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP
address pool.
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet
mask.
address of the actual remote DHCP server here.
Table 11-2 TCP/IP Ethernet Setup Menu Fields
notation
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
SPACE BAR
] to select the RIP direction. Choices are Both,
In Only, Out Only or None.
SPACE BAR]
RIP-2B or RIP-2M.
Prestige 645R-A Series User's Guide
DESCRIPTION
DESCRIPTION
to select the RIP version. Choices are RIP-1,
EXAMPLE
Server
(default)
192.168.1.33
32
EXAMPLE
192.168.1.1
255.255.255.0
Both
(default)
RIP-1
(default)
11-3
Advertisement
Table of Contents
Troubleshooting
