Figure 21-3 Menu 25.1.1 Ip Routing Policy; Table 21-2 Menu 25.1.1 Ip Routing Policy - ZyXEL Communications Prestige 645R-A Series User Manual

Prestige 645R-A Series User's Guide
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Press Space Bar to Toggle.
The following table describes the fields in this menu.
FIELD
Policy Set Name
Active
Criteria :
IP Protocol
Type of Service
Precedence
Packet Length
21-4
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal
Precedence = 0
Source:
addr start= 1.1.1.1
port start= 20
Destination:
addr start= 2.2.2.2
port start= 20
Action= Matched
Gateway addr = 192.168.1.1
Type of Service= Max Thruput
Precedence = 0

Figure 21-3 Menu 25.1.1 IP Routing Policy

Table 21-2 Menu 25.1.1 IP Routing Policy

This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to
deactivate the policy. Inactive policies are displayed with a minus sign "-" in
SMT menu 25.
IP layer 4 protocol, for example, UDP, TCP, ICMP, etc.
Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput, Min Cost or Max Reliable.
Precedence value of the incoming packet. Press [SPACE BAR] and then
[ENTER] to select a value from 0 to 7 or Don't Care.
Type the length of incoming packets (in bytes). The operators in the Len
Comp (next field) apply to packets of this length.
Packet length= 40
Len Comp= N/A
end= 1.1.1.1
end= 20
end= 2.2.2.2
end= 20
Log= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
IP Policy Routing