Internet Access Configuration; Figure 12-6 Menu 4 Internet Access Setup; Table 12-2 Menu 4 Internet Access Setup - ZyXEL Communications Prestige 645R-A Series User Manual

12.6 Internet Access Configuration

Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information.
Use the Internet Access Checklist table in the Read Me First to record your Internet account information.
Note that if you are using PPPoA or PPPoE encapsulation, then the only ISP information you need is a
login name and password. You only need to know the Ethernet Encapsulation Gateway IP address if you
are using ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4 - Internet Access Setup, as shown next.
The following table contains instructions on how to configure your Prestige for Internet access.
FIELD
ISP's Name
Encapsulation
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
Service Name= N/A
My Login= N/A
My Password= N/A
NAT= SUA Only
Address Mapping Set= N/A
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 12-6 Menu 4 Internet Access Setup

Table 12-2 Menu 4 Internet Access Setup

Enter the name of your Internet Service Provider. This
information is for identification purposes only.
SPACE BAR
Press [ ] to select the method of encapsulation
used by your ISP. Choices are PPPoE, PPPoA, RFC 1483 or
ENET ENCAP.
Prestige 645R-A Series User's Guide
DESCRIPTION EXAMPLE
MyISP
ENET ENCAP
12-5