Table of Contents
Advertisement
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
After you click the right arrow icon on the Connection Status (Network Map) page, the Status
screen is displayed. See
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure VMG features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Wireless
Chapter 2 The Web Configurator
Chapter 5 on page 55
TAB
FUNCTION
This screen shows the network status of the VMG and computers/
devices connected to it.
Broadband
Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G Backup
Use this screen to configure 3G/LTE WAN connection.
Advanced
Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
Ethernet WAN
Use this screen to convert Ethernet LAN 4 port as WAN port, or
restore the WAN port to LAN port.
802.1x
Use this screen to view and configure the IEEE 802.1x settings on the
VMG.
General
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest/More AP
Use this screen to configure multiple BSSs on the VMG.
MAC
Use this screen to block or allow wireless traffic from wireless devices
Authentication
of certain SSIDs and MAC addresses to the VMG.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS
Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others
Use this screen to configure advanced wireless settings.
Channel Status
Use this screen to scan wireless LAN channel noises and view the
results.
VMG1312-Bx0D User's Guide
24
for more information about the Status screen.
Advertisement
Table of Contents
