Table of Contents
Advertisement
Figure 301 Menu 7.2: TCP/IP and DHCP Ethernet Setup
DHCP= None
Client IP Pool:
DHCP Server Address= N/A
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
35.4 on page 523
Note: DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the WLAN port (see
15.1 and 15.2.
39.2.2 IP Alias Setup
You must use menu 7.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 7.2.1 - IP Alias Setup, as shown next.
Chapter 39 Wireless Setup
Menu 7.2 - TCP/IP and DHCP Ethernet Setup
Starting Address= N/A
Size of Client IP Pool= N/A
Press ENTER to Confirm or ESC to Cancel:
for information on how to configure these fields.
ZyWALL 5/35/70 Series User's Guide
TCP/IP Setup:
IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
Chapter 42 on page
558) in menus
Section
544
Advertisement
Table of Contents
Troubleshooting
