Figure 128 Anti-Spam Rule Edit - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User's Guide
Table 87 Anti-Spam: Lists (continued)
LABEL
Insert
Blacklist
Use Blacklist
Active
Type
Content
Modify
Insert
Apply
Reset
15.5 Anti-Spam Rule Edit Screen
Click SECURITY, ANTI-SPAM, Lists to display the Anti-Spam Lists screen. To create a
new anti-spam whitelist or blacklist entry, type the index number where you want to put the
entry. and click Insert to display the ANTI-SPAM Rule Edit screen.
If you have already configured an anti-spam whitelist or blacklist entry, you can click the edit
icon to display the ANTI-SPAM Rule Edit screen.

Figure 128 Anti-Spam Rule Edit

271
DESCRIPTION
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Select this check box to have the ZyWALL treat e-mail that matches a blacklist
entry as spam.
This field shows whether or not an entry is turned on.
This field displays whether the entry is based on the e-mail's source IP address,
source e-mail address or an MIME header.
This field displays the source IP address, source e-mail address or MIME
header for which the entry checks.
Click the Edit icon to change the entry. Click the Remove icon to delete the
entry. Click the Move icon to change the entry's position in the list.
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 15 Anti-Spam