Id Type And Content Examples; Table 95 Local Id Type And Content Fields; Table 96 Peer Id Type And Content Fields; Table 97 Matching Id Type And Content Configuration Example - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

between three encryption algorithms (DES, 3DES and AES), two authentication algorithms
(MD5 and SHA1) and two key groups (DH1 and DH2) when you configure a VPN rule (see
Section 19.12 on page
incoming SAs.
The type of ID can be a domain name, an IP address or an e-mail address. The content is the IP
address, domain name, or e-mail address.

Table 95 Local ID Type and Content Fields

LOCAL ID TYPE= CONTENT=
IP
DNS
E-mail
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address.

Table 96 Peer ID Type and Content Fields

PEER ID TYPE=
IP
DNS
E-mail
Subject Name
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address. The domain name also does not
have to match the remote router's IP address or what you configure in the Remote Gateway Address
field below.

19.7.1 ID Type and Content Examples

Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
The two ZyWALLs in this example can complete negotiation and establish a VPN tunnel.

Table 97 Matching ID Type and Content Configuration Example

ZYWALL A
Local ID type: E-mail
Local ID content: tom@yourcompany.com
Chapter 19 VPN Screens
320). The ID type and content act as an extra level of identification for
Type the IP address of your computer or leave the field blank to have the ZyWALL
automatically use its own IP address.
Type a domain name (up to 31 characters) by which to identify this ZyWALL.
Type an e-mail address (up to 31 characters) by which to identify this ZyWALL.
CONTENT=
Type the IP address of the computer with which you will make the VPN connection
or leave the field blank to have the ZyWALL automatically use the address in the
Remote Gateway Address field.
Type a domain name (up to 31 characters) by which to identify the remote IPSec
router.
Type an e-mail address (up to 31 characters) by which to identify the remote IPSec
router.
Type the subject name (up to 255 characters) by which to identify the remote IPSec
router. This option is available only when you set Authentication Key to
Certificate.
ZyWALL 5/35/70 Series User's Guide
ZYWALL B
Local ID type: IP
Local ID content: 1.1.1.2
308