Figure 202 System Dns: Insert Name Server Record; Table 148 System Dns: Add Address Record - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User's Guide
The following table describes the labels in this screen.

Table 148 System DNS: Add Address Record

LABEL
FQDN
IP Address
Enable Wildcard
Apply
Cancel
26.6.2 Inserting a Name Server record
Click Insert in the System screen to insert a name server record.

Figure 202 System DNS: Insert Name Server Record

419
DESCRIPTION
Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the
host, "zyxel" is the second-level domain, and "com.tw" is the top level domain.
If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports,
select WAN Interface and select WAN 1 or WAN 2 from the drop-down list box.
If this entry is for the WAN port on a ZyWALL with a single WAN port, select WAN
Interface.
For entries that are not for the WAN port(s), select Custom and enter the IP
address of the host in dotted decimal notation.
Select the check box to enable DNS wildcard.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
Chapter 26 DNS