Figure 321 Menu 15.2.1: Nat Server Sets - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Figure 321 Menu 15.2.1: NAT Server Sets

4 Select Edit Rule in the Select Command field; type the index number of the NAT server
you want to configure in the Select Rule field and press [ENTER] to open Menu 15.2.1.2
- NAT Server Configuration (see the next figure).
Chapter 42 Network Address Translation (NAT)
Menu 15.2.1 - NAT Server Setup
Default Server: 0.0.0.0
Rule Act. Start Port
------------------------------------------------------
001 No 0
002 No 0
003 No 0
004 No 0
005 No 0
006 No 0
007 No 0
008 No 0
009 No 0
010 No 0
Select Command= None
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 5/35/70 Series User's Guide
End Port IP Address
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
Select Rule= N/A
566