Figure 395 Menu 25.1.1: IP Routing Policy Setup
The following table describes the fields in this screen.
Table 241 Menu 25.1.1: IP Routing Policy Setup
FIELD
LAN/DMZ/WLAN/
ALL WAN
Selected Remote
Node index
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
50.3 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
Chapter 50 IP Policy Routing
Menu 25.1.1 - IP Routing Policy Setup
Apply policy to packets received from:
LAN= No
DMZ= No
WLAN= No
ALL WAN= Yes
Selected Remote Node index= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to apply
the policy to packets received on the specific interface(s).
If you select No in the ALL WAN field, enter the number of the WAN port.
ZyWALL 5/35/70 Series User's Guide
640