Figure 246 Password Setup
The following table describes the labels in this screen.
Table 173 Password Setup
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset
31.4 Time and Date
The ZyWALL's Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyWALL.
To change your ZyWALL's time and date, click MAINTENANCE, then the Time and Date
tab. The screen appears as shown. Use this screen to configure the ZyWALL's time based on
your local time zone.
Chapter 31 Maintenance
DESCRIPTION
Type the default password or the existing password you use to access the system
in this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Type the new password again for confirmation.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5/35/70 Series User's Guide
482