Command Usage; Figure 386 Valid Commands; Table 233 Valid Commands - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User's Guide
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

48.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 386 Valid Commands

Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ether
config
bridge
av
radius
ras>
The following table describes some commands in this screen.

Table 233 Valid Commands

COMMAND
sys
exit
ether
aux
ip
ipsec
bridge
bm
certificates
8021x
radius
625
ls
poe
ip
bm
as
DESCRIPTION
The system commands display device information and configure device settings.
This command returns you to the SMT main menu.
These commands display Ethernet information and configure Ethernet settings.
These commands display dial backup information and control dial backup connections.
These commands display IP information and configure IP settings.
These commands display IPSec information and configure IPSec settings.
These commands display bridge information.
These commands configure bandwidth management settings and display bandwidth
management information.
These commands display certificate information and configure certificate settings.
These commands configure 802.1x settings and display 802.1x information.
These commands display RADIUS information and configure RADIUS settings.
exit device
pptp aux
ipsec ppp
certificates idp
cnm 8021x
Chapter 48 System Maintenance Menus 8 to 10