Figure 276 Menu 11.3: Remote Node Profile (Backup Isp); Table 193 Menu 11.3: Remote Node Profile (Backup Isp) - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User's Guide
Figure 276
Rem Node Name=
Active= No
Outgoing:
My Login= ChangeMe
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
Pri Phone #= 0
Sec Phone #=
The following table describes the fields in this menu.

Table 193 Menu 11.3: Remote Node Profile (Backup ISP)

FIELD
Rem Node
Name
Active
Outgoing
My Login
My Password
Retype to
Confirm
Authen
Pri Phone #
Sec Phone #
Edit PPP
Options
515
Menu 11.3: Remote Node Profile (Backup ISP)
Menu 11.3 - Remote Node Profile (Backup ISP)
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter a descriptive name for the remote node. This field can be up to eight characters.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the remote node or
No to disable the remote node.
Enter the login name assigned by your ISP for this remote node.
Enter the password assigned by your ISP for this remote node.
Enter your password again to make sure that you have entered is correctly.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when requested by this
remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
Enter the first (primary) phone number from the ISP for this remote node. If the
Primary Phone number is busy or does not answer, your ZyWALL dials the
Secondary Phone number if available. Some areas require dialing the pound sign #
before the phone number for local calls. Include a # symbol at the beginning of the
phone numbers as required.
Move the cursor to this field and use the space bar to select [Yes] and press [Enter] to
edit the PPP options for this remote node. This brings you to Menu 11.3.1 - Remote
Node PPP Options (see
Edit PPP Options= No
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Always On= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Section 34.7 on page 516).
Chapter 34 WAN and Dial Backup Setup