Figure 115 Idp: Signatures; Table 80 Idp Signatures: Group View - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Internet security appliance

Table of Contents

Figure 115 IDP: Signatures

The following table describes the labels in this screen.

Signature Groups

Chapter 13 Configuring IDP

Select the type of signatures you want to view from the list box. See

for information on types of signatures.

Click this hyperlink to go to a screen where you can search for signatures based on

criteria other than attack type.

The (read-only) signature name identifies a specific signature targeted at a specific

intrusion. Click the hyperlink for more detailed information on the intrusion.

Each intrusion has a unique identification number. This number may be searched at

myZyXEL.com for more detailed information.

This field displays the level of threat that the intrusion may pose. See

for more information on intrusion severity.

This field displays the computer or network device operating system that the intrusion

targets or is vulnerable to the intrusion. These icons represent a Windows operating

system, a UNIX-based operating system and a network device respectively.

Select the check box in the heading row to automatically select all check boxes and

enable all signatures.

Clear it to clear all entries and disable all signatures on the current page. For example,

you could clear all check boxes for signatures that targets operating systems not in

your network. This would speed up the IDP signature checking process.

Alternatively, you may select or clear individual entries. The check box becomes gray

when you select the check box.

If you edited any of the check boxes in this column on the current page, use the check

box in the heading row to switch between the settings (last partial edited, all selected

and all cleared).

ZyWALL 5/35/70 Series User's Guide

Section 13.3.1 on

Table 78 on page