Chapter 41 Ip Static Route Setup; Ip Static Route Setup; Figure 311 Menu 12: Ip Static Route Setup - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

This chapter shows you how to configure static routes with your ZyWALL.

41.1 IP Static Route Setup

Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
Note: The first two static route entries are for default WAN1 and WAN2 routes on a
ZyWALL with multiple WAN ports; the first static route entry is for the default
WAN route on a ZyWALL with a single WAN port. You cannot modify or delete
a static default route. The name of the default static route is left blank unless
you configure a static WAN IP address.
The route name changes from "default" to "-default" after you change the static
WAN IP address to a dynamic WAN IP address, indicating the static route is
inactive.

Figure 311 Menu 12: IP Static Route Setup

1. Reserved
2. Reserved
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
9. ________
10. ________
11. ________
12. ________
13. ________
14. ________
15. ________
Enter selection number:
Now, enter the index number of the static route that you want to configure.

Chapter 41 IP Static Route Setup

C
H A P T E R
IP Static Route Setup
Menu 12 - IP Static Route Setup
16. ________ 31. ________
17. ________ 32. ________
18. ________ 33. ________
19. ________ 34. ________
20. ________ 35. ________
21. ________ 36. ________
22. ________ 37. ________
23. ________ 38. ________
24. ________ 39. ________
25. ________ 40. ________
26. ________ 41. ________
27. ________ 42. ________
28. ________ 43. ________
29. ________ 44. ________
30. ________ 45. ________
ZyWALL 5/35/70 Series User's Guide
46. ________
47. ________
48. ________
49. ________
50. ________
4 1
556