ZyWALL 5/35/70 Series User's Guide
Figure 224 Telnet
The following table describes the labels in this screen.
Table 155 Telnet
LABEL
Server Port
Server Access
Secure Client IP
Address
Apply
Reset
27.13 FTP
You can upload and download the ZyWALL's firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your ZyWALL's FTP settings, click ADVANCED, REMOTE MGMT and then
the FTP tab. The screen appears as shown.
Note: It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
443
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using
this service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 27 Remote Management