Table of Contents
Advertisement
ZyWALL 5/35/70 Series User's Guide
The following table describes the labels in this screen.
Table 120 Directory Servers
LABEL
PKI Storage Space
in Use
#
Name
Address
Port
Protocol
Modify
Add
20.16 Directory Server Add or Edit
Click SECURITY, CERTIFICATES, Directory Servers to open the Directory Servers
screen. Click Add (or the details icon) to open the Directory Server Add screen. Use this
screen to configure information about a directory server that the ZyWALL can access.
Figure 174 Directory Server Add
363
DESCRIPTION
This bar displays the percentage of the ZyWALL's PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
The index number of the directory server. The servers are listed in alphabetical
order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Click Add to open a screen where you can configure information about a directory
server so that the ZyWALL can access it.
Chapter 20 Certificates
Advertisement
Table of Contents
Troubleshooting
