Figure 194 Bandwidth Management: Summary; Table 141 Bandwidth Management: Summary - ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Internet security appliance
Table of Contents

Advertisement

ZyWALL 5/35/70 Series User's Guide

Figure 194 Bandwidth Management: Summary

The following table describes the labels in this screen.

Table 141 Bandwidth Management: Summary

LABEL
Class
Active
Speed (kbps)
Scheduler
Maximize
Bandwidth
Usage
Apply
Reset
405
DESCRIPTION
These read-only labels represent the physical interfaces. Select an interface's check
box to enable bandwidth management on that interface. Bandwidth management
applies to all traffic flowing out of the router through the interface, regardless of the
traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN or DMZ-to-DMZ traffic to pass
through the ZyWALL and be managed by bandwidth management.
Select an interface's check box to enable bandwidth management on that interface.
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
This appears as the bandwidth budget of the interface's root class (see
25.11 on page
406). The recommendation is to set this speed to match what the
device connected to the port can handle. For example, set the WAN interface speed
to 1000 kbps if the broadband device connected to the WAN port has an upstream
speed of 1000 kbps.
Select either Priority-Based or Fairness-Based from the drop-down menu to
control the traffic flow.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally. See
page
400.
Select this check box to have the ZyWALL divide up all of the interface's unallocated
and/or unused bandwidth among the bandwidth classes that require bandwidth. Do
not select this if you want to reserve bandwidth for traffic that does not match a
bandwidth class (see
Section 25.7.4 on page
this interface (see the Speed field description).
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Section 25.7 on
401) or you want to limit the speed of
Chapter 25 Bandwidth Management
Section

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 5 seriesZywall 35 seriesZywall 70 series

Table of Contents