Configuring Time Setting; Figure 44 System > Time Setting - ZyXEL Communications NWA-3160 Series User Manual

Chapter 5 System Screens
Table 12 Password
LABEL
RADIUS
Apply
Reset

5.4 Configuring Time Setting

To change your ZyXEL Device's time and date, click SYSTEM > Time Setting. The screen
appears as shown. Use this screen to configure the ZyXEL Device's time based on your local
time zone.
Figure 44 SYSTEM > Time Setting
80
DESCRIPTIONS
Select the RADIUS server profile of the RADIUS server that is to authenticate
management logins to the ZyXEL Device.
The ZyXEL Device tests the user name and password against the RADIUS
server when you apply your settings.
• The user name and password must already be configured in the RADIUS
server.
• You must already have a RADIUS profile configured for the RADIUS
server (see Section 7.11 on page
• The server must be set to Active in the profile.
Click Apply to save your changes.
Click Reset to reload the previous configuration for this screen.
112).
ZyXEL NWA-3160 Series User's Guide