CHASSIS
7.1.5.
FRONT FAIRING REMOVAL
TORQUE WRENCH SETTINGS
Screws (1-3)
Repeat these three steps on either side:
•
Release and remove the two screws (1).
•
Remove the rearview mirror (2).
•
Release and remove the three screws on the side
fairing (3).
•
Release and remove the screw (4).
•
Disconnect the headlight connector (5).
•
Remove front fairing and headlamp together.
7 - 10
3 Nm (0.3 Kgm)
RS 125