FUEL SYSTEM
4.2.
AIR CLEANER
4.2.1.
AIRBOX REMOVAL
TORQUE WRENCH SETTINGS
Screws (1)
Screws (2)
•
Remove the fuel tank; see
•
Release and remove the two screws (1).
•
Release and remove the two screws (2) and collect the
nuts from beneath the screws.
•
Remove the airbox cover (3).
•
Slacken the clip (4).
•
Remove the airbox complete with air cleaner.
NOTE Block off the carburetor opening with a clean cloth to
prevent the ingress of debris into the intake ducts.
4 - 6
5 Nm (0.5 Kgm).
5 Nm (0.5 Kgm).
4.1.1.
RS 125