CHASSIS
7.1.7.
FUEL TANK FILLER CAP REMOVAL
TORQUE WRENCH SETTINGS
Screws (1)
Screws (3)
•
Put the motorcycle on the stand.
•
Release and remove the three screws (1).
NOTE The other three screws are there for aesthetic
purposes only and can be left in place.
•
Open the filler cap (2).
WARNING
Be careful when removing the screw (3). Take
care not to drop it into the fuel tank.
•
Release and remove the screw (3).
•
Remove the filler cap (2) together with the flange (4).
WARNING
Block off the filler opening to prevent the
ingress of dirt.
7 - 12
5 Nm (0.5 kgm)
3 Nm (0.3 kgm)
RS 125