CHASSIS
LEFT-HAND SIDE FAIRING
•
Put the motorcycle on the rear wheel stand (OPT), see
1.7.2.
•
Lower the side stand.
•
Disconnect the speedometer cable (6).
•
Release and remove the six screws (7).
•
Withdraw the pin (8).
•
Release and remove the two screws (9) at the front
end.
•
Disconnect the two electrical connectors (10) of the
direction indicator.
•
Remove the left side fairing (11) sliding it along the
side stand.
The following applies to both side fairings:
•
If you need to remove the inner protection (13), release
and remove the four screws (12).
7 - 8
RS 125