RS 125
1.6.3.
SPECIAL TOOLS
Special and suitable tools are required to carry out the
disassembly and reassembly operations as well as for a
correct setting up.
The use of special tools avoids any possible damage arising
from the use of non-suitable tools and/or the implementation
of improvised procedures. The special tools, designed for
this vehicle, are listed hereinafter.
Should you require some special general tools, please refer
to the special tools manual.
WARNING
Before using any special tool, please refer to
the documents coming with the tool itself.
Key:
Position
Tool name and function
1
Front service stand
2
Tool for chain assembly/disassembly
3
Ø10 mm to Ø 30 mm bearing pulling kit
4
Rear service stand
5
Rear service stand surface mounts
6
Tool-holding panel
7
Swingarm pivot shaft ring nut wrench
GENERAL INFORMATION
Part No.
8146486
8140192
8140180
8705021
8140204
8140199
8101945
1 - 15