APRILIA RS 125 Manual page 224

CHASSIS
• Grasp the slider and pull firmly to separate slider and
stanchion.
NOTE Take care not to damage the slider inner seating
surface during removal of the different components.
•
Lever with a flat-blade screwdriver to remove the dust
seal (4).
•
Use a small screwdriver to remove the retaining ring
(5) from inside the slider.
•
Extract the oil seal (6) with the aid of a large
screwdriver.
•
Slide out the guide bush cap (7) from inside the slider.
•
Tap the end of the slider firmly on a wooden bench to
knock out the slide bushes (8) and the spacer (9).
WARNING
Keep the slider at right angles to the bench
while tapping.
If the bushes are a tight fit in the slider, use a
bush extractor, but be careful not to scratch the
slider inner surface.
7 - 92
RS 125
8
9
8
7
6
5
4