CHASSIS
7.1.13.
REMOVING THE SEAT END COVER
TORQUE WRENCH SETTINGS
Screws (1)
Screws (2)
Screws (4)
•
Remove the seat; see
•
Release and remove the two screws (1) on both sides.
•
Release and remove the four screws (2).
•
Lower the seat end cover.
•
Remove the flasher (3) from its housing.
7 - 18
2 Nm (0.2 Kgm).
3 Nm (0.3 Kgm).
3 Nm (0.3 Kgm).
7.1.1.
RS 125