ROUTINE MAINTENANCE
2.4.2. CHECKING AND CLEANING THE TERMINALS
Carefully read
2.4.1.
•
Make sure that the ignition switch is in position " ".
•
Raise the fuel tank, see
•
Make sure that the cable terminals (1) and the battery
terminals (2) are:
in good conditions (and not corroded or covered with
deposits);
covered with neutral grease or vaseline.
If necessary, proceed as follows:
•
Disconnect the negative cable (-) first and the the
positive one (+).
•
Brush the wire with a wire brush, in order to eliminate
any trace of corrosion.
•
Reconnect the positive terminal (+) first and then the
negative one (-).
•
Cover the terminals of the cables and of the battery
with neutral grease or vaseline.
•
Refit the fuel tank, see
2 - 16
2.9.1.
4.1.1.
RS 125