RS 125
•
Start the two caliper mounting bolts (7) in their holes
and tighten.
•
Hold in the front brake lever and press down on the
handlebars repeatedly to pump the front fork up and
down. This will allow the fork legs to seat themselves
properly.
•
Tighten the two wheel spindle clamp bolts (8) working
on both sides.
•
Remove the front wheel stand (OPT); see
1.7.1.
•
Remove the rear wheel stand (OPT); see
1.7.2.
WARNING
After refitting the wheel, work the front brake
lever repeatedly and check for proper
operation of the brake.
Ensure that the wheel is properly centred.
CHASSIS
7 - 67