AUTOMIX
STORE
RECALL
SCENE MEMORY
If you want to keep the contents of the current automix, store them into an
available memory location before proceeding.
1. Use the [AUTOMIX] button to locate the AUTOMIX 2/7 page.
2. Use the SCENE MEMORY increment or decrement buttons to
select your starting scene memory and press the [RECALL]
button.
The selected scene memory is recalled.
Your mixdown scene memory should be stored with the [FLIP] button
pressed so that the faders operate the tape returns rather than the input
channels.
Note: You can customize your 02R so that the [FLIP] button status is ignored
during scene memory recalls. In this case, you may need to press the [FLIP] button
before you start recording your automix. See "Preferences" on page 198 of the
User's Guide for more information.
3. Set your starting levels for the mixdown and press the [STORE]
button to update the scene memory.
The 02R will display a popup confirmation request message. Select the
"EXECUTE" icon and press the [ENTER] button.
4. Use the CURSOR buttons to select the "NEW" icon and press the
[ENTER] button.
The 02R will display a popup confirmation request message asking if you
want to make a new automix. The popup has two icons: "CANCEL" and
"EXECUTE":
Mixing and Automix
02R Getting Started Guide
71