Pan Controls - Yamaha O2R Owner's Manual

38 MIXING Display Functions
02R User's Guide
Switching to Gang mode allows you to reposition the stereo signal within
the stereo field. For example, you could set L5 and R10 before you Gang the
channels. After you press [ENTER], adjusting either channel moves the
other a corresponding amount. If you set the left channel to L7, the right
channel would adjust to R8.

PAN controls

You can also adjust the pan position or balance of the selected channel with
the controls in the SELECTED CHANNEL group.
L/ODD
These controls allow you to select the pan position of the selected channel.
The buttons select one of two channels (channels are always paired for the
pan function). The LED is illuminated in the selected channel of the pair.
Use the rotary encoder to adjust the pan position. The current position is
indicated on the adjacent LED bargraph.
You can link the odd and even channel pairs by pressing and holding the
[L/ODD] button and then pressing the [R/EVEN] button. When a pair of
channels are linked together in GANG mode, The LEDs in both buttons are
illuminated and the LED of selected channel flashes. The indicator for the
selected channel also flashes in the adjacent LED bargraph.
Note: You can customize your 02R so that when you adjust any of the controls
in this group, the display switches to the PAN display function. See "Preferences"
on page 198 of the User's Guide.
L
R/EVEN
ODD
PAN
R
EVEN