Yamaha O2R Owner's Manual page 295

The second PAIR page, shown below, contains pair hearts for the aux sends
and bus outs.
The following functions are linked when aux channels are paired:
• Input channel aux send level (depends on input channel pan)
• Aux master levels
• Aux master on/off and pre/post
The following functions are linked when bus channels are paired:
• Bus master levels
• Dynamics parameters
Use the CURSOR buttons to select a heart and press the [ENTER] button to
make or break the pair.
Another method of pairing input channels is to press and hold the [SEL]
buttons of both channels. When the Make Pair dialog box appears, select
EXECUTE to pair the channels. Which channel's settings are copied to the
other channel depends on which [SEL] button you press first. For example,
if you press the MIC 1 [SEL] button and then MIC 2 [SEL] button, the
settings of the MIC 1 channel are copied to the MIC 2 channel, and vice
versa. The Make Pair dialog box, shown below, indicates in which direction
the channels settings will be copied.
When a channel from a stereo pair is selected, its [SEL] button indicator
lights up, and the [SEL] button indicator on the other channel flashes. To
cancel a channel pair, press both [SEL] buttons, and choose EXECUTE on
the Break Pair dialog box. The SELECTED CHANNEL AUX buttons can be
used to pair aux channels in a similar way.
Groups and Pairs
02R User's Guide
185