Yamaha O2R Owner's Manual page 198

88 Dynamics
02R User's Guide
Icons
• STORE —This icon is used to store the current program to the library.
Select the icon with the CURSOR buttons. Use the encoder wheel to
select a program and press the [ENTER] button. The 02R displays a
confirmation dialog box asking if you want to store your settings in the
selected program. The dialog box has two icons: "CANCEL" and
"EXECUTE".
Note: You can customize your 02R to prevent the confirmation dialog box
appearing during the STORE operation. See "Preferences" on page 198 of
the User's Guide for more information.
CANCEL is the default. To cancel the STORE operation, either press
the [ENTER] button or wait about 10 seconds—the STORE operation
will be automatically cancelled.
To store your settings, use the CURSOR buttons to select the
"EXECUTE" icon and press the [ENTER] button. The program is
stored.
When you confirm a STORE operation, any existing data in the
selected program location is overwritten.
YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS
A CONFIRMATION DIALOG BOX!
• RECALL—This icon is used to recall a program from the library. Select
the icon with the CURSOR buttons. Use the encoder wheel to select a
program and press the [ENTER] button. The recalled program is now
the current program.
• CLEAR—This icon is used to clear the contents of a dynamics
program. Use the CURSOR buttons to select the icon. Use the encoder
wheel to select a dynamics program and press the [ENTER] button.
The 02R displays a confirmation dialog box asking if you want to clear
the dynamics program. The dialog box has two icons: "CANCEL" and
"EXECUTE".
Note: You can customize your 02R to prevent the confirmation dialog box
appearing during the CLEAR operation. See "Preferences" on page 198 of
the User's Guide for more information.
CANCEL is the default. To cancel the CLEAR operation, either press
the [ENTER] button or wait about 10 seconds—the CLEAR operation
will be automatically cancelled.
To clear the dynamics program, use the CURSOR buttons to select the
"EXECUTE" icon and press the [ENTER] button. The program is
cleared.
If you change your mind, the cleared dynamics program can be
retrieved by recalling the Undo dynamics program (U).
• COPY—This icon is used to copy the name of a library program. Select
the icon with the CURSOR buttons. Use the encoder wheel to select a
program and press the [ENTER] button. The program name is copied
into an edit buffer.