Setup; Receive Channel - Yamaha O2R Owner's Manual

1. Use the [MIDI] button to
locate the MIDI 1/5
page.
MIDI
2. Use the CURSOR buttons
to select the item you
want to change and
press the [ENTER] button.

Setup

The MIDI Setup page is used to configure basic 02R MIDI parameters, such
as MIDI transmit and receive channels, OMNI on/off, and echo on/off.
Shown below is the MIDI 1/5 page—MIDI Setup.

Receive Channel

Use these parameters to set the Receive Channel, and select whether the
02R will receive Program Change, Parameter Change, and Control Change
messages. When you change the MIDI Receive Channel, the MIDI Transmit
Channel is set automatically to the corresponding channel.
Transmit Channel
Use these functions to set the Transmit Channel, and select whether the 02R
will transmit Program Change and Parameter Change messages.
OMNI
Use this function to select whether the 02R will receive Program Change
messages regardless of the Receive Channel setting. This parameter is
enabled when it is highlighted.
Echo
Use this function to select whether the received Program Change messages
are echoed from the MIDI IN to the MIDI OUT. This parameter is enabled
when it is highlighted.
MIDI 159
02R User's Guide