Output Specifications; Digital Input And Output Specifications; Output Specifications; Digital Input And Output Specifications - Yamaha O2R Owner's Manual

Output Specifications
Output connection
STEREO OUT (L, R)
STUDIO MONITOR OUT (L, R) 150
CONTROL ROOM MONITOR
OUT (L, R)
AUX (1, 2, 3, 4, 5, 6)
INSERT OUT
MIC/LINE 1 through 8
PHONES
*1 INSERT OUTPUT phone jacks are balanced. (Tip=OUT, Ring=IN, Sleeve=GND)
In these specifications, when dB represents are specific voltage, 0 dB is referenced to 0.775 volts RMS.
In these specifications, when dBV represents are specific voltage, 0 dBV is referenced to 1 volts RMS.
Digital Input and Output Specifications
Input/Output
DIGITAL IN (COAXIAL)
(2TRK IN 2, 3)
DIGITAL OUT (COAXIAL)
(STEREO OUT)
DIGITAL IN (AES/EBU)
(2TRK IN 1)
DIGITAL OUT (AES/EBU)
(STEREO OUT)
WORD CLOCK IN
WORD CLOCK OUT
MIDI IN
MIDI OUT
MIDI THRU
TO HOST
METER
MTC IN
TC IN
Actual For use
source with
impedance nominal
150 600 lines
600 10k lines
10k lines
150 10k lines
600 10k lines
600 10k lines
8 phones
100
40 phones 3 mW
Format
IEC958 Consumer
(S/PDIF)
IEC958 Consumer
(S/PDIF)
IEC958 Professional
(AES/EBU)
IEC958 Professional
(AES/EBU)
–
–
MIDI
MIDI
MIDI
–
–
MIDI
SMPTE
Specifications
Output level
Max be-
Nominal
fore clip
+ 4 dB +24 dB
(1.23V) (12.3V)
–10 dBV +10 dBV
(316mV) (3.16V)
+ 4 dB +24 dB
(1.23V) (12.3V)
+ 4 dB +24 dB
(1.23V) (12.3V)
+ 4 dB +20 dB
(1.23V) (7.75V)
+ 0 dB +20 dB
(0.775V) (7.75V)
1 mW 25 mW
110 mW
Level
0.5Vpp/75
0.5Vpp/75
RS422
RS422
TTL / 75
TTL / 75
–
–
–
–
RS422
–
Nominal –10 dBV/10k
247
Mixer connector
XLR-3-32 type
RCA/phono
(Unbalanced)
Phone Jack
(Balanced)
Phone Jack
(Balanced)
Phone Jack
(Unbalanced)
Phone Jack
*1
(Unbalanced)
Stereo Phone Jack
(Unbalanced)
Mixer connector
RCA/phono jack
RCA/phono jack
XLR-3-32 type
XLR-3-31 type
BNC
BNC
DIN Connector 5P
DIN Connector 5P
DIN Connector 5P
MiniDIN Connector 8P
Dsub Connector 15p
DIN Connector 5P
RCA/phono jack
02R User's Guide