About Effects - Yamaha O2R Owner's Manual

104 Internal Effects
AUX 1 AUX 2 AUX 3 AUX 4
AUX 7 AUX 8
AUX 5 AUX 6
EFF1 EFF2
AUX
AUX 1 AUX 2
AUX 3 AUX 4
AUX 5 AUX 6
AUX 7 AUX 8
EFF1 EFF2
SEND LEVEL
AUX
02R User's Guide

About Effects

The 02R features two internal multi-effects stereo processors: Effect 1 and
Effect 2. These are fed by AUX 7 and AUX 8, and the processed signals are
returned via EFF 1 RTN and EFF 2 RTN, respectively. The auxiliary sends
can be configured pre-fader or post-fader. Effects can be applied to input
channels, the tape return channels, or the stereo output channel. Effects are
organized into programs. There are 40 preset effects programs (1 through
40) and 88 user effects programs (41 through 128 plus an UNDO buffer) for
you to store your own settings.
There are two different ways to access the internal effects sends:
DISPLAY ACCESS—AUX buttons
These buttons access the AUX pages that set the auxiliary send levels for
the recording console.
The [AUX 7] and [AUX 8] buttons are routed to the internal effects unit.
Use them to set the send levels to the corresponding effects unit and select
pre or post fader. These buttons also allow you to select and set the effects
parameters.
The channel aux send level controls for each aux send are displayed on two
pages. The first page shows MIC/LINE aux controls. The second, TAPE
and effects returns aux controls.
SELECTED CHANNEL—AUX controls
These buttons and controls set the auxiliary send levels for the currently
selected channel.
• The [AUX 1] to [AUX 8] buttons allow you to select the auxiliary buses
you want to send the selected channel signal to.
• The SEND LEVEL rotary encoder is used to set the level—indicated by
the adjacent LED bargraph.
• The [ON] button is used to turn the send on or off. It allows you to
make easy A-B comparisons.
ON