Yamaha O2R Owner's Manual page 226

116 Internal Effects
Program 13 — REV SN.ROOM
This is a reverb variation to enhance the sound of a snare drum.
Parameter Setting
Rev.Time 1.3s
Hi.Ratio 0.9
Diff. 8
Ini.Dly 26.0ms
Density 1
LPF 10.0KHz
HPF 180Hz
Rev.Dly 4.0ms
Rev.Bal 90%
Program 14 — REV SN.PLATE
This is also for snare drums, similar to program 13.
Parameter Setting
Rev.Time 1.7s
Hi.Ratio 0.9
Diff. 2
Ini.Dly 20.0ms
Density 1
LPF 11.0KHz
HPF 140Hz
Rev.Dly 6.0ms
Rev.Bal 90%
Program 15 — CHORUS–>REVERB
Stereo chorus followed by reverb. This program will change a dry sound into a warm sound with spread. Use the
reverb Depth parameter to adjust the amount of reverberation.
Parameter Setting
Freq. 4.5Hz
Depth 14%
Mod.Dly 7.3ms
Rev.Time 1.7s
Hi.Ratio 0.8
Diff. 8
Ini.Dly 30.0ms
LPF 12.0KHz
HPF 40Hz
Depth 60%
02R User's Guide
Range
Same as program 1 Same as program 1
Range
Same as program 1 Same as program 1
Range
0.1–40.0Hz Modulation frequency.
0–100% Modulation depth. The amount of modulation.
0.0–255.0ms Modulation delay. The delay time before modulation begins.
0.3–30.0s Reverb time.
0.1–1.0 High frequency decay ratio.
0–10 Reverb diffusion.
0.1–200.0ms Initial delay between the direct sound and early reflections.
1.0kHz–THRU Low pass filter cutoff frequency.
THRU–8.0kHz High pass filter cutoff frequency.
0–100% Reverb depth. The amount of reverb.
Description
Description
Description