Yamaha O2R Owner's Manual page 363

Error Message
SUB SCI0 Party Err.
SUB SCI0 RxBuf. Full
SUB SCI0 TxBuf. Full
SUB SCI1 Framing Err.
SUB SCI1 OverRun Err.
SUB SCI1 Party Err.
SUB SCI1 RxBuf. Full
SUB SCI1 TxBuf. Full
TC RxBuf. Full
TC TxBuf. Full
Too Large Bulk!
Undo Buf. is Empty!
Undo Buf. is Full!
Undone Recall.
Undone Store.
Wrong WORD CLOCK!
Too many cascade in/out cards.
Shut off the power and check
slot, please.
Consult the nearest YAMAHA service center.
MIDI data being transmitted is too large.
MIDI data being received is too large.
Check the MIDI connection.
Check the MIDI connection.
Check the MIDI connection.
MIDI data being transmitted is too large.
MIDI data being received is too large.
Buffer for time code reception is full.
Buffer for time code transmission is full.
MIDI bulk data size is too large.
The previous operation cannot be undone because no data exists in
the undo buffer.
The store operation cannot be done because the data exists in the
undo buffer.
The recall operation was undone.
The store operation was undone.
The device for synchronization (selected from the 02R) is sending in-
correct word clock. Reconfigure the synchronization system.
There are more than two cascade cards or too many cards with the
"in" or "out" setting. Check the slot condition, and turn the power on
to the 02R again.
Specifications
Corrective Action
253
02R User's Guide