Yamaha O2R Owner's Manual page 72

CANCEL is the default. To cancel the STORE operation, either press the
[ENTER] button or wait about 10 seconds—the STORE operation will be
automatically cancelled.
To store your settings, use the CURSOR buttons to select the "EXECUTE"
icon and press the [ENTER] button.
The scene memory is stored.
Note: If you decide you do not like a scene memory after you have stored it, it is
very easy to overwrite it by adjusting the mixer settings and storing them to the
same location. Conversely, it is also very easy to accidentally overwrite a valued
scene memory. The 02R has a "Memory Protect" feature to help prevent this, but
this feature can interfere with your work, plus it is very easy to turn off the
protection. See "Protecting Scene Memories" on page 134 of the User's Guide
YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS A
CONFIRMATION DIALOG BOX!
Naming a Scene Memory
Scene memories can be named before being stored or after. In the latter
case, you must first recall the scene memory, name it, and then store it. In
this tutorial, a scene memory that has already been stored is named.
1. Use the [SCENE MEMORY] button to locate the SCENE 1/5 page
shown below.
SCENE
MEMORY
2. Use the SCENE MEMORY increment or decrement buttons, or
encoder wheel, to select the scene memory.
When you select a different scene memory, the number displayed in the
SCENE MEMORY LED indicator flashes.
3. Press the [RECALL] button to recall the scene memory.
4. Use the CURSOR buttons to select the TITLE EDIT box.
Secondary Recording Tutorial
02R Getting Started Guide
63