Mitsubishi Electric MELSERVO-J3 Series Manual page 296

Part 5: Common Reference Material
The following shows how to use the J3 extension function.
(1) Settings of J3 extension function
To use the J3 the extension function, enable the setting of the extension control 2 parameters ([Pr. PX_
_ ]). Set as follows using MR Configurator2.
(a) Setting to enable the extension control 2 parameters ([Pr. PX_ _ ])
1) Open the "Project" menu and click "New" in MR Configurator2. The "New" window will be
displayed.
POINT
To set the J3 extension function, connect a personal computer with MR
Configurator2 of software version 1.25B or later to the servo amplifier with USB
cable.
The extension control 2 parameters ([Pr. PX_ _ ]) cannot be set from a controller.
5 - 111