Adding Documents To A Standby Operation - Xerox WorkCentre 480cx User Manual

Print the 480cx User Guide
8
Using the Number keypad, enter the time the fax will be sent. Use the
Up or Down button to switch between AM and PM. If you set a time
earlier than the current time, the document will be sent at that time on
the following day.
Note: Remember to enter the time in either twelve or twenty-four hour
clock mode format, depending upon which mode you enabled. For more
information, see Selectable Options on page 1-52.
9
After entering the time, press the Start/Enter button.
10
The machine scans the document into memory, returns to Standby mode
and displays a reminder that a Delayed Transmission is set.
Note: If you want to cancel the Delayed Transmission, see Canceling a
Standby Operation on page 3-15 .

Adding Documents To a Standby Operation

You can add documents to a Delayed Transmission previously entered into
memory.
1
Place the document face down in the Automatic Document Feeder. If
necessary, adjust the resolution and contrast. For details, see Resolution
on page 3-23 and Contrast on page 3-25.
2
Press the Menu button.
3-14 Sending a Fax