Xerox WorkCentre 480cx User Manual page 239

Print the 480cx User Guide
Symptom
The paper constantly jams.
Printing is too slow.
Cause and Solution
• There is too much paper in the Automatic
Paper Feeder (APF). Remove some of the
paper from the APF. If printing onto
transparencies, or labels, insert them one at a
time in the Manual Paper Feeder.
• An incorrect type of paper is being used.
Use only paper that meets the specifications
required by the printer.
• The paper setting method may be incorrect.
If printing onto envelopes, insert the
envelopes so that there is a gap of
approximately 1 mm (1/32") between the left
and right edges of the envelopes at the paper
guide.
• If using Windows 3.x, Print Manager may be
disabled. From the Control Panel Printers
menu, check the Use Print Manager box.
• If using Windows 3.x, the Background
Printing item in the Option menu of Print
Manager may be set incorrectly. Select
Background Printing from the Option
menu in the Print Manager.
• If using Windows 95/98 or NT 4.0, the
Spooling Setting may be set incorrectly.
From the Start menu, select Settings and
Printers. Click the Work Centre icon with
the right mouse button, select Properties,
click the Details tab, and then click the
Spool Settings button. Select the desired
spool setting from the available choices.
Printer Problems
7
7-17