Xerox WorkCentre 480cx User Manual page 281

Print the 480cx User Guide
WARNING: This product must be earthed.
!!
This product is equipped with a 3-wire, grounding-type plug (i.e., a plug
having a third grounding pin). This plug will only fit into a grounding-type
power outlet. This is a safety feature. To avoid the risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert
9
the plug into the outlet. Never use a grounding adapter plug to connect the
product to a power source receptacle that lacks a ground connection
terminal.
This product should be operated from the type of power source indicated
on the marking label. If you are not sure of the type of power available,
consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the product
where persons will step on the cord.
Slots and openings in the cabinet and in the back and bottom of the product
are provided for ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be blocked or
covered. The product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation unless
proper ventilation is provided.
Never push objects of any kind into the slots of the product as they may
touch dangerous voltage points or short out parts which could result in a fire
or electric shock.
Never spill liquid of any kind on the product.
Never remove any covers or guards that require a tool for removal, unless
directed to do so in a Xerox approved maintenance kit.
Safety and Legal Requirements for the UK 9-11