Table of Contents
Advertisement
Print the 480cx User Guide
You can also configure your machine to print out a confirmation report
automatically each time a fax is sent.
To automatically print a confirmation report:
1
Press the Menu button.
2
Press the System Data button (01) on the One-Touch keypad.
3
Press the Down or Up buttons repeatedly until MESSAGE CONF.
appears in the display.
a)
Press 1 to print a confirmation report automatically each time you
send a fax (ON).
Or
b)
Press 2 to turn this feature off (OFF).
Or
c)
Press 3 to print only when an error occurs and the transmission was
not successful (ERR).
If an error occurred during your fax transmission, an error message appears
in the display. If you receive an error message, press Stop to clear the
message and try to send the document again.
For a listing of error messages and their meanings, see LCD Display Error
Messages on page 7-8.
Manual Faxing
3-9
3
Advertisement
Table of Contents
Troubleshooting
