Table of Contents
Advertisement
Print the 480cx User Guide
Plug one end of a telephone cable into the WorkCentre's Line connector,
and the other end into the wall outlet. Also, plug the PC fax/data modem
Line into the wall outlet. Plug the extension telephone into the EXT
connector. The PC printer port is connected to the WorkCentre's printer port
with the Xerox supplied printer cable.
You should use the PC fax/data/voice mail to answer incoming calls and
receive faxes. Use the WorkCentre to send hard copy faxes and print.
9
At the WorkCentre, set the Receive mode to TEL. At the control panel,
press the Receive button (until TEL displays).
Consult your PC fax/data modem documentation for answer mode and other
settings.
Telephone Connectivity Guidelines
9-31
Advertisement
Table of Contents
Troubleshooting
