Table of Contents
Advertisement
Print the 480cx User Guide
Plug one end of a telephone cable into the WorkCentre's Line connector,
and the other end into the wall outlet. Also, plug the PC fax/data modem
Line into the wall outlet. Plug the answering machine into the EXT
connector on the WorkCentre and the external telephone into the Line out
connector of the answering machine. The PC printer port is connected to the
WorkCentre's printer port with the Xerox supplied printer cable.
The answering machine will answer incoming calls, but the WorkCentre
will take over if the incoming call is a fax. Set the WorkCentre's Receive
9
mode to ANS/FAX. At the control panel, press the Receive button (until
ANS/FAX displays).
Telephone Connectivity Guidelines
9-29
Advertisement
Table of Contents
Troubleshooting
