Xerox WorkCentre 480cx User Manual page 59

Print the 480cx User Guide
4
Enter your ID name. This can be any name up to 20 characters in
length. You can enter alphanumeric characters using the number
keypad. Special symbols such as + and - can be included by pressing 0
repeatedly.
Note: If there is an ID name previously registered, it appears in the display.
If you want to enter the same letter or number in succession (for
example, SS, AA, 777), enter one digit, then move the cursor by
pressing the Right button, and enter the next digit.
Use the Right button to insert a space in the name, Pressing the Right
button two times moves the cursor two positions to the right, creating a
space.
For additional details on how to use the number keypad to enter
alphanumeric characters, see Entering Alphanumeric Characters on
page 3-26.
5
Press Enter when the name in the display is correct.
System Setup 1-47
1