Adding Documents To A Scheduled Fax - Xerox Phaser 3200MFP User Manual

Adding Documents To a Scheduled Fax

Xerox Phaser 3200MFP
3.
Press Menu until "Fax Feature" appears on the top line of the display.
4.
Press the scroll button ( or ) to display "Priority Fax" on the bottom line
and press Enter.
5.
Enter the number of the receiving machine using the number keypad.
You can also press and hold the digit button of the speed dial number if
you have assigned one. To store the speed dial number, see Storing a
Number for Speed Dialing on page 8.13.
6.
Press Enter to confirm the number. The display asks you to enter a
name.
7.
To assign a name to the transmission, enter the name you want. For
details about entering characters, see Entering Characters Using the
Number Keypad on page 2-16.
If you do not want to assign a name, skip this step.
8.
Press Enter.
The document is scanned into memory before transmission. The display
shows memory capacity and the number of pages being stored in
memory.
For a document placed on the document glass, the display asks if you want to load
another page. To add more documents, press the scroll button ( or ) to display
"Yes" and press Enter. To send the fax immediately, press the scroll button ( or
) to display "No" and press Enter.
9.
The machine shows the number being dialed and begins sending the
document.
You can add documents to a delayed transmission previously reserved in your
machine's memory.
1.
Load the document(s) face up into the ADF, or place a single document face
down on the document glass.
For details about loading a document, see Loading a Document on page 8-4.
2.
Adjust the document resolution to suit your fax needs (see Adjusting the
Document Resolution on page 8-5).
If you need to change the brightness, see Lighten/Darken on page 8-2.
3.
Press Menu until "Fax Feature" appears on the top line of the display.
4.
Press the scroll button ( or ) to display "Add Page" on the bottom line and
press Enter.
The display shows the last job reserved in memory.
8 Faxing
8-21