Xerox WorkCentre 480cx User Manual page 10

Print the 480cx User Guide
Use supplies or cleaning materials only as directed. Keep all supplies and
materials out of reach of children.
Do not use the WorkCentre 480cx near water, in wet locations, or outdoors.
Do not place the WorkCentre 480cx on an unstable cart, stand, or table.
The WorkCentre 480cx may fall, causing personal injury or serious damage
to the machine.
This product is equipped with a grounding type plug. The plug will fit only
into a grounded power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you are
unable to insert the plug into the outlet. Never use an adapter to connect the
WorkCentre to a power source receptacle that lacks a ground connection
terminal.
The WorkCentre 480cx should be operated from the type of power source
indicated on the label. If you are not sure of the type of power available,
consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the
WorkCentre 480cx where people will step on the cord.
The power supply cord is the disconnect device for this equipment.
Ensure that the WorkCentre 480cx is installed near an outlet and is easily
accessible.
Your machine is equipped with an energy saving device to conserve power
when the machine is not in use. The machine may be left on continuously.
Slots and openings in the cabinet and in the back and sides of the
WorkCentre are provided for ventilation. To ensure reliable operation of the
WorkCentre and to protect it from overheating, these openings must not be
blocked or covered. The WorkCentre 480cx should never be located near or
over a radiator or heat register. The WorkCentre 480cx should not be placed
in a built-in installation unless proper ventilation is provided.
x