Xerox WorkCentre 480cx User Manual page 71

Print the 480cx User Guide
You can suspend or change Distinctive Ring Pattern Detection at any
time:
Press the Menu button.
Press the System Data button on the One-Touch keypad.
Press the Up button once. The DRPD learn mode menu is displayed.
Press 1 to turn DRPD on.
Press 2 to turn DRPD off.
If you press 1 to setup the Distinctive Ring Pattern Detection, the LCD
displays WAITING RING. Call your fax number from another
telephone. It is not necessary to place the call from a fax machine.
When your machine begins to ring, do not answer the call. The
machine requires several rings to learn the pattern.
When the machine completes "learning," the LCD displays END DRPD
SETUP.
With the DRPD feature active, DRPD appears in the display and the
previously set reception mode is ignored. If you turn DRPD off, the
machine returns to any previously set reception mode.
Note: DRPD must be set up again if you re-assign your fax number, or
connect the machine to another telephone line.
After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone, then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT. jack.
System Setup 1-59
1