Xerox WorkCentre 480cx User Manual page 288

Print the 480cx User Guide
In general, under the scope of this approval, this product has been designed
to work with the national PSTNs of the following countries:
Austria
Belgium
Denmark
Finland
France
Netherlands
The test standard used for this approval is TBR21. To assist in the use and
application of terminal equipment approved against this standard, the
European Telecommunication Standards Institute (ETSI) has issued an
advisory document (EG 201 121) which contains notes and voluntary
additional requirements to ensure network compatibility of TBR21
terminals. The Xerox fax functions have been designed against, and are
fully compliant with, all of the relevant advisory notes contained in this
document.
The fax kits may also be configured by a Xerox representative to be
compatible with other country networks. Other countries, not listed above,
will be approved against their own National requirements. Please contact
your Xerox representative if the WorkCentre 480cx needs to be reconnected
to another country's network. There are no user adjustable settings on the
fax option.
9-18 Appendix
Greece Norway
Iceland Portugal
Ireland Spain
Italy Sweden
Luxembourg Switzerland
United Kingdom